Chicago Metal Container Manufacturer Faces Penalties After 3rd Worker Suffers Amputation Injury

Today’s post was shared by WC CompNewsNetwork and comes from www.workerscompensation.com

Chicago, IL (WorkersCompensation.com) – For the third time since the summer of 2015, a worker with a metal container manufacturer has suffered an amputation injury. In each incident, federal safety investigators found that, if the employer had complied with workplace safety standards, the injuries were preventable.

On Dec. 27, 2016, the U.S. Department of Labor’s Occupational Safety and Health Administration issued B-Way Corp. one repeated and one serious safety violation, carrying proposed penalties of $81,062, following its investigation of the most recent injury. On Sept. 10, 2016, a machine amputated a 52-year-old temporary worker’s right middle finger tip when it came in contact with the machine’s operating parts – as he cleared a jam.

Agency investigators determined the employer installed the machine’s safety guards improperly. They also found the company did not instruct workers properly in procedures to prevent machine movement during service and maintenance, a process known as lockout/tag out.

"Each year, manufacturing workers suffer hundreds of preventable injuries because employers fail to install safety guards properly and train workers in machine safety procedures," said Kathy Webb, OSHA’s area director in Calumet City. "BWay Corp. needs to review its machines’ operations corporate-wide immediately to ensure they have adequate and properly installed safety guards. They must also be sure that workers are using lockout/tag out procedures to…

[Click here to see the rest of this post]